Cheese bucket mold

Plastic cheese bucket had good function of sealing and easy storage which is better for cheese best-selling. Till now, square shape cheese bucket and round shape cheese bucket is more attractive to cheese manufacture.

Cheese bucketmould

A set cheese bucket need develop bucket body mould, bucket lid mould and bucket handle mould. Firstly, it needs to choose good mold steel. Normally, good steel could guarantee 3million shots mold life. And if you need big production capability, the mold could design two cavities, four cavities or more cavities. The cycle time is about 7s, so buyer could decide which cavity is suitable.

IML bucket mold

To develop IML bucket mold, the mold design need IML robot machine information if multi-cavities. The center of IML robot needs symmetric to mold center so that the robot could easy take out the labeled bucket. Besides, mold open stroke is also very important. Based on IML need or not, the mold design with auto fall or semi-auto fall. What’s more, the IML robot will pick the labeled bucket on convey so that the factory could achieve automatic production line.

More information regarding to cheese bucket mold, please feel free to contact my email address: sino6001@sinomould.com

From: Stacy

Skype: sinogroupe-62

IML bucket line

IML bucket line, this is 19L bucket. HDPE raw material. A complete line contains IML bucket mold, injection molding machine, dryer, material auto loader, crusher, water chiller, water tower, pump and so on, And IML robot and safety door, and convery. More information, pls feel free to contact email: sino6001@sinomould.com

IML machine

IML project is popular in the market as the application of IML technology increased huge benefit. A complete IML project contains IML tool, IML machine and auxiliary machinery.

IML tool contains IML container tool and IML lid tool. We had rich experience and strong ability working team. From part design to mold shipment, we had strict control system. First, time control system. After order, our project manager will make schedule. Each step is under control so that our IML tool had short time delivery. Second, dimension control system. By using bridge coordinate measuring machine, our IML tool will inspect after each tooling finished. Only the dimension is qualified, the tool could enter into next tooling step.

IML machine contains IML high injection molding machine and IML robot. Our machine is high energy saving, high efficiency, high speed, high stability, high safety. In order to fit to IML tool, our machine screw had high plasticization so that the cycle time is short and high speed. And our IML robot is work with Italy factory which specialized in providing quick and quality IML robot. Besides, the auxiliary machinery had safety door for IML project. It made the production clean and more safety.

From: Stacy
Email: sino6001@sinomould.com
Skype: sinogroupe-62

IML SYSTERM

Take advantage of In mold labelling technology, cup and container will more nice and attractive. This system needs IML robot take label into opened mold, and after injection, robot take out injected parts to conveyor. Email: sino6001@sinomould.com

square cheese container

cheese container is PP material, shrinkage is 1.6%. And cheese container mold is S136 mold steel, with HRC 48-52 which could guaranteed mold life 1M or 5M. 2L Square cheese container tool dimension is 450*450*550MM. Cycle time for single cavity is about 10s. Besides, our mold dimension and spare parts are all meet DME standard which is very easy for mold maintenance.

Light cheese container tool|TUBE MOLD

Light cheese square tubes and round cheese containers are best-selling disposable food containers. So, more and more investors were attracted by light cheese tube tool.

plastic tube and lid 

Square cheese container mould information:
Light cheese container voltage: 2L 
Material: PP
Injection gate: hot runner 1 tip pin gate
Mold steel : S136 stavax, with HRC 48-52
Inserts: H13, HRC 12-45
Mold base: P20, HRC 29-31
Ejection way: stripper+ air blowing
Tube Mold action: automatic demolding


Square cheese lid mold information: 
Light cheese container voltage: 2L 
Material: PP
Injection gate: hot runner 1 tip pin gate
Injection gate: hot runner 1 tip pin gate (reverse structure for in mold labeling design)
Mold steel : S136 stavax, with HRC 48-52
Inserts: H13, HRC 42-45
Mold base: P20, HRC 29-31
Ejection way: ejector pins
Inserts: H13, HRC 42-45
Lid Mold action: automatic demolding

Customer will apply In mold labeling technology for cheese tube and lid mold. Sometimes, he wants to use IML, container mould could semi-auto take off. Sometimes, he wants without mold labeling, mold could auto take down. So, it is accord customer demanding to make a adjustment.

Any question regarding to light cheese tube and lid molding, pls feel free to contact email: sino6001@sinomould.com

Post by: Stacy Zheng
Skype: sinogroupe-62
Whatsapp:+8615168642559

Ice cream package container molding-SINO PACKAGE

Customer always prefer to develop four cavities ice cream packaged container molds as multi-cavities will bring more production capacity and in further will create much benefit. Hence, we aim to provide high efficiency plastic container molding line.

Plastic container line

To achieve high efficiency, container moulds need multi-cavities design, optimal cooling system and air venting system. Those are basic standard for making a good ice cream mold, what I want to introduce our main characteristic is our mould design for easily maintenance. One is core inserts could disassemble in front which do not need taking down mold, the other one is inserts & wear plates could easy take out and installing. Every design point for us is that satisfying handy operation and long time guarantee life.

Besides, injection molding machine is also play important role in high efficiency plastic container molding as packaged containers belong to quick returns and small margins products. Considering this, it needs and short cycle time. That’s require injection molding machine is quick speed and high injection pressure. What’s more, mold opening and ejecting is parallel action, this greatly improve molding machines performance. 

More question regarding to ice cream packaged container information, please feel free to contact email: sino6001@sinomould.com

Post by Stacy 
Skype: sinogroupe-62
WhatsAPP: +8615168642559

Cheese container tool

container tool

No matter square container tool or roundcontainer tool, we could ensure cheese container nice appearance design and good function.

During cheese part design, we will consider fitting, water sealing and stacking function as design basic. And considering reasonable water-sealing finger position and distribution, stacking distance and so on, we will ensure each cheese container biggest loading weight but under lightest weight.

Cheese container is PP material, shrinkage is 1.6%. And cheese container mold is S136 mold steel, with HRC 48-52 which could guaranteed mold life 1M or 5M. 2L Square cheese container tool dimension is 450*450*550MM. Cycle time for single cavity is about 10s. 2L round cheese container mold is 400*400*450MM. Cycle time for single cavity is about 8s. Besides, our mold dimension and spare parts are all meet DME standard which is very easy for mold maintenance.

Besides, cheese container mold was always tested on high speed injection molding machine. As thin-wall container cooling time is very short, high speed machine has the function of 3 axis linkages to realize material charging, mold open and mold eject all at same time. This way is greatly shorted cycle time and improves production capability.

More information regarding to cheese container tool information, please feel free to contact Email: sino6001@sinomould.com

From: Stacy

Skype: sinogroupe-62

Thin wall container mold

Thin wall container and lid are widely used in daily life, especially for packing food container, ice cream container and so on. Hence, this large demand promoted thin-wall container mold development.

1.Food container lid and body need very transparent surface and nice appearance. So we adapt S136 stavax for mold cavity and core. Take advantage of this steel high polishing function, it save polishing time and also achieved high polishing result. Besides, it also could guarantee 3M shots mold life for food container mold. What’s more, the thin wall container also have high polishing surface.

2.Container and lid need good stacking and fitting. So we have strong food container design team. Part designer will draw most suitable stacking height so that saves transportation cost. And they will better consider the fitting between container and lid.

3.Short cycle time, huge productivity for thin-wall container mold. We design multi-cavities for container and lid mold. 12cavities, 6s cycle time by installing on high speed injection molding machine. Besides, food container lid could assemble on various containers which also save inventor’s cost.

4.Optimal cooling system and air venting system. We had strong food container mold design working team which designer had at least 3-4 years. Besides, if the mold core designed with insert, it will better for thin wall container air venting system.

5.IML system application depends on customer needs or not. Designer team need to consider this point so that the mould had this function. The IML thin-wall container could design to auto fall or semi-auto fall. And take advantage of IML robot, the thin-wall container will inject quickly and response faster.

IML mold

Any question regarding to food container mold ,IML thin wall container and IML thin wall project, please feel free to contact email: sino6001@sinomould.com or my Skype: sinogroupe-62.

IML mold design

                                   IML mold design

IML technology is widely used in mold manufacture which could make part more attractive and add water-proof function. So, Mold design needs considering IML information so that IML robot could successfully running with mold.

IML mold design points:
1.If mold is multi-cavities, the mold design need robot information, such like robot center distance because the robot needs to pick the label into mold cavities. The mold center need symmetric with IML robot distance.

2.Mold action: auto fall or semi-auto fall. Mold design could accord customer need to design which kind. This information need also consider machine open stroke so that the IML labeled parts easily take out.

3.Part surface dealing: Since the surface will use IML technology, the surface will not using high polishing surface. Cut this process, the mold delivery time will short.

4.Cooling system: Since IML big production capability, the cooling system is very good. Our designer will draw many groups cooling so that the cycle time could greatly cut.

5.Air venting system: Take advantage of insert design, the mold core will have optimal air venting system. Besides, good air venting system makes part nice appearance.

More information regarding to IML mold design, please feel free to contact me.

From: Stacy
Email: sino6001@sinomould.com
Skype: sinogroupe-62

IML advantage

                                        IML advantage

                                         

This article aims to introduce IML advantages. Take advantage of in mold labeling technology, the bucket becomes best-selling and enlarge the market. Normally, this IML technology is widely using in plastic container, bucket and cup products.

Traditional bucket will adopt printing for wrapping the factory logo and contact information. This way is easy to erase when the bucket under water, so first advantage of IML is water-proof function. This ensures factory contact information is bright and not easy damage.

Secondly, the IML label could colorful and various design type. It is more aesthetic so that your factory culture could easy remember by consumer. Besides, it is more attractive and impressive as the colorful design with a high brilliance.

Thirdly, since the label put into mold, then inject. It combines with part so that the label gives the mould a high stiffness.

Last but not at the least, IMl process is easy operation and saving the package cost. After setting the IML system, it could automatic running which is highly improving efficiency. Besides, IML process enables the decoration production and packing in one working step. Any more question regarding to IML process, IML mold, IML injection molding machine information, please feel free to contact email: sino6001@sinomould.com

From: Stacy
Skype: sinogroupe-62

IML injection molding machine

                      IML injection molding machine

IML injection molding machine

As the development of flouring IML molds, how to choose a good IML injection moulding machine becomes a hot topic. Normally the IML parts need high production capability and the cycle time need very short, so high speed injection molding machine is best suitable for producing IML parts.

Why to choose high speed injection molding machine for IML molds?

1. Screw with double thread mixing. IML molds need high speed injection so that the machine needs high plasticization. Hence, a good screw is very important. Screw with double thread mixing design will ensure full material mixture.

2.  High speed response. IML molds need shot cycle time, so the injection machine needs high pressure and high speed response. And it also need adopts high precision single cylinder injection system, especially suitable for high speed injection, with low-inertia and high response speed.

3.  High precision. Normally IML molds worked with IML robot, so the inject position and temperature also need high precision control. First, the machine controller needs good brand computer control so that precisely control the temperature and location. Secondly, precision servo-valve will help machine runs with high precision and response faster.

4.  High energy saving. IML parts unit price is low, so during injection, energy saving will also greatly saving the production cost. IML high speed machine with servo-motor to charge, compared with hydraulic motor, it can save energy consumption and at the same time control the position more precisely.

5.  Safety protection: high speed injection moulding machine with mechanical, hydraulic, electrical triple protection and security module independent control system. Besides, the machine frame is fully closed.

More information regarding to IML injection molding machine or how to choose a good IML injection molding machine for producing IML molds, please feel free to contact email:sino6001@sinomould.com and it is very glad to discuss.

From: Stacy

Skype: sinogroupe-62

IML project

IML project is popular in the market as the application of IML technology increased huge benefit. A complete IML project contains IML tool, IML machine and auxiliary machinery.

IML tool contains IML container tool and IML lid tool. We had rich experience and strong ability working team. From part design to mold shipment, we had strict control system. First, time control system. After order, our project manager will make schedule. Each step is under control so that our IML tool had short time delivery. Second, dimension control system. By using bridge coordinate measuring machine, our IML tool will inspect after each tooling finished. Only the dimension is qualified, the tool could enter into next tooling step.

IML machine contains IML high injection molding machine and IML robot. Our machine is high energy saving, high efficiency, high speed, high stability, high safety. In order to fit to IML tool, our machine screw had high plasticization so that the cycle time is short and high speed. And our IML robot is work with Italy factory which specialized in providing quick and quality IML robot. Besides, the auxiliary machinery had safety door for IML project. It made the production clean and more safety.

From: Stacy

Email: sino6001@sinomould.com

Skype: sinogroupe-62

Thin wall cup mould

Thin wall cup mould is popular in the market as its impressive design and light weight. And increasing thin wall cup manufacture aims to IML technology application in thin wall cup market as it brings huge benefit.

Thin wall cup molds using H13 or DIN 1.2344, temperature with HRC 42-48 for mould cavity and core steel which will prolong the mold life. And normally, the thin wall cup mould core was designed inserting. This help the thin wall cup mould has a good air venting and easy for customer future mold maintenance. Besides, taking advantage of hot runner system, it will greatly help the thin wall cup rapid molding. And accordingly, it is greatly short the cycle time.

Besides, the application of IML technology make the thin wall cup is attractive and interesting, and special label with logo will increase the sales volume. From IML thin wall cup molds to IML robot, plastic high speed injection molding machine and auxiliary equipments, it need combines working step one step so that the whole line could normally running.

Any question regarding thin wall cup mould, thin wall cup molding or IML thin wall cup solution, please feel free to contact email: sino6001@sinomould.com

From: Stacy

Skype: sinogroupe-62

IML moulds

IML technology is widely used in ice creamcontainer mould since it is water-proof function and attractive color design. Hence, ice cream container IML moulds is greatly increased in market.

The operation of ice cream container IML technology is the robot picks the IML label into ice cream container mold, then mold close and inject. After mold open again, robot pick out the labeled ice cream container to the conveyor.

IML container mold:

Cavity 2 or 4 or more

Mold material: S136 Stavax from ASSAB, with temperature 48-52.

Injection gate: hot runner system, multi-tips

Ejection way: air + stripper

Cycle time: 4-5s with beryllium copper.

Delivery time: 60 working days

Spare part standard: DME standard which could also easy for mold maintenance.

Mold design tips: Since this mold need fast cycle time, the container mold need optimal cooling system. It needs many groups water cooling. And for easy operation, the water connector could design in non-operation side. Of course, it is also important for optimal cooling system. Besides, the ejection distance needs special design. Since mold need work with robot, the mold open stroke also need considering. What’s more, If you need IML technology apply in container bottom, the mold also need reverse so that the injection nozzle prolong and also using the hydraulic system.

IML mold test: The mold need high speed injection molding machine. It had high plasticization so that the material could fulfill mold in fast time. Then take advantage of best cooling system, and high pressure, the IML container mold could achieve high speed molding and injection.

The main characteristic of IML mold is nice attractive and water-proof. And it will make your ice cream more impressive. So if you interest and have more question regarding to ice cream container IML mold, please feel free to contact Email: sino6001@sinomould.com.

From: Stacy

Skype: sinogroupe-62

Cheese container mold solution

cheese tub mold

Cheese container had two types which is round and square. No matter which shape, SINO could provide good quality cheese container moulds solution. Till now, we had many experience of providing this turnkey project in Egypt, Venezuela and so on. If you are the new want to develop cheese container production line, please check below items. 1.     Material purchase: Food grade PP material. We had good discount policy with SINOPEC since we are cooperation friend. And our company had export license.
 2.    Light weight control. Under quality container molding, we will control weight to minimum so that save material cost. Besides, our designer will draw the suitable thin-wall thickness. The thickness experience for container is to realize 0.45mm.
 3.    Design working team: First is part design. We will pay more attention on stacking, fitting, water sealing and safety lock. Any requirement, the part design will achieve in reasonable situation. Besides, container tool design also has optimal cooling system, air venting system and so on.
 4.    Quality container tool control: we had independent quality control department. Take advantage of part able coordinate measuring machine and bridge coordinate measuring machine, it will ensure each mold part precision.
 5.    High speed injection molding machine for cheese container moulds. Our machine is high speed, high efficiency, high safety, and high precision and high quality.
 Besides, cheese container mold was always tested on high speed injection molding machine. As thin-wall container cooling time is very short, high speed machine has the function of 3 axis linkages to realize material charging, mold open and mold eject all at same time. This way is greatly shorted cycle time and improves production capability. More information regarding to cheese container tool information, please feel free to contact Email: sino6001@sinomould.com our working team will provide professional container moulding solution. And Spring Canton Fair 2016, our 4.5s container molding solution will show. Welcome to visit our booth.

Container molding solution

Optimal plastic container molding need smooth running plastic container moulds, high speed injection machine and related equipment. Such like, chillier for greatly improve cooling so that short the cycle time. And air compressor with big volume which will make sure pressure is stability.

container molds

For adjust best plastic container molding parameter, high speed injection molding machine is important as its 3 axis linkage to realize material charging, mould opening and ejection at the same time. Action at the same time will greatly short the cycle time, this way is our high speed injection molding machine characteristic. Second is optimal cooling system. Water connector need multi-group which one group for water coming in and going out. And input and output temperature difference need ensure 5°so that container thickness is balance. The third one is injection temperature. Suitable temperature will ensure material flow fast and balance. The last one is high speed and high pressure which will fill container very quickly.

More question regarding to containermolding solution, please feel free to contact Email: sino6001@sinomould.com. Our working team will provide professional container moulding solution. And Spring Canton Fair 2016, our 4.5s container molding solution will show. Welcome to visit our booth.

Paint pail machine

Paint pail machine contains paint pail mold, pail injection molding machine and related paint pail auxiliary equipments.

Paint pail mold: paint pail body mold, paint pail lid mould, paint pail handle mold. If your pail lid is special, it also need pail cover mould and pail cap mold. And pail handle material could be steel or plastic. This could accord your meet to choose corresponding mold amount.

paint pail mold

Paint pail injection molding machine: Normally for 20L paint pail, we chose 500 ton machine. And 5L pail, we choose 268ton machine. Accord to mold information, we will pick suitable and good quality machine. If machine is limited, we will design the optimal mold designs which could match distance between bars and open stroke and so on.

Related auxiliary equipments: it had cooling system and air compressor system. Cooling system contains water tower, pump, chiller, water pool. And air compressor system has chiller, filter, de-humidification and gas storage tank. Besides, 20L paint pail need cut machine, material loading machine, dry machine at your choice.

Above is basic equipment machine for paint pail tooling, if you have special requirement, we could give you more professional advice. More question, please feel free to contact Email: sino6001@sinomould.com

From: Stacy

Skype: sinogroupe-62

IML tub mold

cheese tub molding

Take advantage of IML technology, tub and Lid are much popular in the market. This had attracted attention of inventors about IML tub mold and IML lid mould. To meet market demanding, our company forces to develop and improve this IML container mould.

Plastic tub mold use S136 Stavax, hardness is 48-52HRC. And according to injection machine and IML information, to chose single cavity mold, 2 cavities moulds and 4 cavities molds. The injection gate is always hot runner system which could greatly increase the injection flow and save material. And ejection way is air+stripper.

The characteristic of IML container mould is our design:

1.     With IML robot, the mould could work with it. Without IML robot, plastic tub could auto fall. Customer could adjust accord demanding.

2.    2 cavities or 4 cavities, our mold cavity and mold core were inserted. This way is very easy for assembling and for future mould maintenance. Besides, our mold cavity insert could take apart from front side which is continent for dismantle and maintenance.

3.    Insert with Beryllium copper, this will greatly improve cooling result and reduce the cycle time. For example, our cheese tub molding, single cavity could achieve about 8-10s.

More question regarding to IML tub mould, please feel free to contact email: sino6001@sinomould.com

From: Stacy

Skype: sinogroupe-62

Food container mould

Container mould is best selling in injected mold market, such like, cheese container mould, food container mould and so on. Among them, food container mould market demand is taken more proportion in market.

Before design food container mould, the function feather need figure out. Normally, if food container need water-leakage without o-ring, the food container mould will become complex. So this point is very important for food container tool design. Besides, mold design need optimal cooling system which needs more groups water lines.

SINO MOULD, which is specialized in exporting multi-cavities food container moulds, has rich experience in container design, container mold making, container moulding test and so on. We are ability to develop food container design but non-infringement. And in food container tool making, take the advantage of high precision tooling equipment and bridge coordinate measuring machine, the multi-cavities mold could guarantee the quality. What’s more, we had independent mold test department which could test in high pressure and low pressure, and injection parameter will adjust to optimal situation.

More information regarding to fool container mold design and moulding, please feel free to contact email: sino6001@sinomould.com. It is very glad to further discuss this topic and related projects.

From: Stacy

Skype: sinogroupe-62